Entity RT25 is designed to work with tubeless-ready rims from 19 - 23mm in width. Double wrap the tape for an airtight seal on your road or mountain bike tyres.
The tape is made from biaxially oriented polypropylene, which provides incredible resistance to moisture and temperature variations.
This has been combined with a silicone adhesive to give incredible tackiness in even the most extreme of environments.
FEATURES:
- Creates durable, airtight seal over spoke holes
- Completely non-porous vapor barrier seals rim interior from moisture
- Low friction surface helps tire beads slip into place
- 25mm wide
- 10m, long enough for about 6 rims double wrapped.
USE:
- The rim must be dry and clean from old tape, dirt, oil based products and liquids that can cause the tape to not adhere.
- Remove any sharp edges from the rim and spokes.
- Apply the tape beginning 5cm to the left of the join opposite the valve hole, and roll the tape to the right using force to keep the tape tight against the rim, pushing out all bubbles
- Keep the tape 100% centered in the rim valley.
- Wrap the rim 2 times, overlapping the tape and ending the loop 10cm past the tape beginning.
- At the valve hole, poke a minimal hole in the rim tape for TV15/45 valve stem.
