The tubeless valves are available in stem lengths of 40 mm, 60 mm and 100 mm and their design makes fitting them a breeze. There is a suitable valve solution for every depth of rim.
The valve base can be firmly installed in the rim using the hex key (4 mm) without over-tightening. The shortened cone ensures a low installation height and therefore more space for the tire beads. Thanks to the large valve inner diameter (4 mm), the tire can be inflated particularly effectively with air and sealing fluid.
- The larger inner diameter of 4 mm optimizes the flow of air and sealant. This
improves the tubeless tires' fitting and blockages caused by sealing fluid
particles are practically impossible. - With the hex key (4 mm), the valve foot can be securely installed in the rim
without deforming the foot. - Due to the shortened cone, the valve base sinks deeper into the valve hole. The
installation height is lower, meaning that there is more space for the tire beads
and assembly is easier. - The valve can be used with the O-ring for any rim contour. An additional
spacer sleeve is not necessary. - The slick design fits perfectly with sporty, stylish bikes.
| Size | Weight | Art.-No. | Set |
|---|
| 40 mm | 4,6 g | 3470 | twin-pack |
| 60 mm | 5,4 g | 3471 | twin-pack |
| 80 mm | 7,2 g | 3474 | twin-pack |
| 100 mm | 7,3 g | 3472 | twin-pack |
![]()
